ELDORADO | Aluminium River Gold Prospecting Sluice - Medium **Limited Stock**

Sold Out

ELDORADO | Aluminium River Sluice - Medium

  • Dimensions are 64 cms long x 19 cms wide and 8 cms deep. 
  • Made in aluminium with steel riffle section over expanded steel mesh with ribbed matting underneath that to capture the finest of gold. 
  • The upstream flare bolts on and delivers increased water flow to your sluice
  • Australian Made 


Sluices are long, narrow "boxes" that water passes through when putting in a creek or stream. Sluicing is a method of separating and recovering gold from the placer gravel by the use of running water. Gold is caught or trapped by riffles. Riffles are purposeful obstructions which slow the movement of gold in the sluice so it can be trapped in miner's moss, carpeting, or rubber matting in the bottom of the sluice, or in the case of plastic, the riffles and small indentations at the base (downstream end)  called the nugget trap.

Nineteenth-century gold miners used wooden sluices that were at least 350cm long, but modern gold prospectors primarily use sluice boxes made of plastic or metal which are typically 50, 70, 90cm or 1.12m long and approx 25 - 30cm -  wide.

The idea is to position a sluice box in a running stream so that the water does the work-- separating the dirt and rocks away from the gold. Since gold is heavy, it will stay in the bottom of the sluice, trapped in the miner's moss/ matting.

A good rule of thumb is to set your sluice at a grade of 25mm per foot (30cm) of the drop. At least start here, and adjust as needed. A steeper grade may result in all but the coarsest gold being carried away by the force of the water.

© Stonex - All Rights Reserved